(5)部分LCS门Pro
The (5) Section Door Pro is designed for the small or medium shop that like to produce their own doors. 能够快速夹紧和固化门, this machine can be used for a few hours a day, 或者一整天, depending on the number of doors that need to be produced. 每个部分都有一个中心的正方形条, which adds an additional clamping area to the section, 另一个同样大小的门. 通过移除中心杆, the full 38″ x 96″ capacity can be used for those Pantry Doors, 端板, 或室内门.
工作原理:
In a typical door shop glue is applied to multiple parts and components assembled on an assembly table. The doors are placed in a section and clamps adjusted. The cylinders are activated by one valve which first creates side pressure pushing the door to the left side square, a second later the vertical clamps are activated to create pressure on the glue joints.
A motor drive is used to rotate the next section. The cured door is removed and new components are placed in that section for clamping. Our (5) section Door Pro can produce up to 300+ doors in an (8) hour shift. 这大约等于2.5 minutes per section and a clamping time of (12) minutes.
(8)部分LCS门Pro
The (8) Section Taylor Door Pro clamping system is designed for the medium to large door shop that clamps either large door production runs or a kitchen at a time. Our design lends itself to fast changeovers, so switching from Door to Door easy and efficient. 每个部分都有一个中心的正方形条, which adds an additional clamping area to the section, 另一个同样大小的门. 通过移除中心杆, the full 38″ x 96″ capacity can be used for those Pantry Doors, 端板, 或室内门 This will keep a high production rate in a one piece workflow style of manufacturing.
工作原理:
In a typical large door shop glue is applied to multiple parts and components assembled on an assembly table by an Operator. The door is placed in a section and clamps adjusted by a 2nd operator. The cylinders are activated by one valve which first creates side pressure pushing the door to the left side square, a second later the vertical clamps are activated to create pressure on the glue joints. The first operator works on the next batch of parts by applying glue and loosely assembling the door while the second operator quality checks the door under pressure and wipes away any excess glue.
A motor drive is used to rotate the next section. The cured door is removed and new components are placed in that section for clamping. Our (8) section Door Pro can produce up to 500+ doors in an 8 hour shift. 这大约等于1.5 minutes per (2) doors and a clamping time of (12) minutes.
